The Angle Ring Company Ltd - steel bending

metal bending is our world

Steel and metal bending engineers for over 60 years
FrançaisDeutschPolski

James Joyce Bridge

James Joyce Bridge, Dublin

James Joyce Bridge, Dublin

James Joyce Bridge, Dublin

James Joyce Bridge, Dublin

These Tubes were Bent for Walking

The Angle Ring Company Limited undertook the bend forming of tubular steelwork used in the construction of the James Joyce Bridge in Dublin. The bridge which spans the Liffey between Ellis Quay and Ushers Island, features twin pedestrianised walkways and viewing areas on each side of a central four-lane section carrying road traffic.

Tubes used for the main arches of the bridge, together with other tubes of varying diameters, for handrails, car rails and the lower support rails of the bridge were all cold formed by Angle Ring.

The main arch steelwork was formed on a large hydraulic press (thought to be the largest horizontal open press in the world), to produce complex multi-axis bends as specified for this uniquely designed structure.

The manipulation of three-dimensional points from CAD drawings were used to develop the bend geometry for individual tubes, with specialist tooling also used to maintain the integrity of the tube cross section and smooth form of the bends. Cold forming was selected as the most efficient method of production, being less costly and time consuming than other bending methods.

The main arches were constructed using two thick walled tubes of different sizes being 368mm and 177.8mm diameter with wall thicknesses of 80mm and 60mm respectively. These were supplied by the main contractor Irishenco Construction, a Mowlem Group Company, in straight lengths of four to five metres. Two or three of these were then welded together by Angle Ring to achieve suitable lengths for cold forming. Owing to the three dimensional curvature of this unique bridge, created by international architect / engineer Dr Santiago Calatrava Valls, multi-axis bends were required in each formed length.

The two main parabolic arches of the bridge were constructed by joining the sections of thick walled tubes together with connecting fishplates to create to continuous, tilted, tied arches as the support spans for this unique structure. The final welding fabrication and assembly work was undertaken at the Belfast shipyard of Harland & Wolff, to create a bridge with a span of 40 metres, having an overall width at the centre of 40 metres, reducing to 27 metres at each end.

Finished in gleaming white, the prestigious James Joyce Bridge has proved to be a worthwhile addition to the many attractions of Dublin's fair city.

back to top

view archive news >>

 

Section Bending
Press Braking
Spiral Bending

Steel Construction Info Link The Steel Construction Institute logo SCCS & UKAS ISO Certification CE Compliance RQSC Logo The British Constructional Steelwork Association Ltd logo

Induction Bending
Plate Rolling
Tube Manipulation

Kelpies curved steel framework - photo by Tracey Fullerton heavy / thick plate forming stainless steel handrail and spine tube Tube Manipulation / Rotary Draw Bending Stainless Steel Duplex Cylinders Spiral or Helical rolled tube Wembley Stadium Arch curved sections

Architectural      •      Engineering      •      Construction      •      Process and Energy      •      Shop-fitting and Interiors

Copyright © 2014 The Angle Ring Company Limited. All rights reserved.    Registered Office: Bloomfield Road, Tipton, West Midlands DY4 9EH, UK    Tel: +44 (0) 121 557 7241